IX otf and ttf fonts

​23.11.2022
IX developer 2.40Sp7

X2 terminals (actually windows CE \ wec2013 ), do not support the newer OTF font standard ( OpenType Font) . Only TTF ( true type font) are supported for terminal targets, however on a PC RT ( Run Time ) you can use OTF. 

It is possible to convert a OFT font to TTF: https://cloudconvert.com/otf-to-ttf

iX Developer SP7 - 2.47.473 Release information

• iX240SP7 LastMinuteNotes iX PIEN341L.pdf.pdf
• iX240SP7 ReleaseNotes iX PIEN340Q.pdf.pdf

Driver MODICON Modbus Slave: Command XDNCW

Windows CE versions, X2, iX, E1000

• WindowsCE_X2_iX_E1000_.xlsx

Creating a custom Welcome screen / Startup screen on a X2 operator panel

X2 series
It's possible to create a custom Welcome Screen / startup screen, this is described in detail in the Configuation and Image manual:
X2 Configuration and Image manual

iX - SMTP - Using Gmail servers using App password

​​​Google has dropped the support for "less secure apps" and no longer supports the use of third-party apps or devices which ask you to sign in to your Google Account using only your username and password.

From now on an "App Password" is required when sending emails from iX panels that are configured to use Gmail's SMTP servers. Please notice that 2 step verification is required in order to create an app password. 

Create and use App Password

1. Login to you Google account.
   
2. Make sure 2-Step Verification is enabled.
   
   
3. Generate an App password. Select "Mail" as app and for device select "Other" and enter a custom name. Click Generate to get an app password.
   
   
4. Then use the following settings for the email device in the iX application
   
   From Email Address: [Gmail address]
   SMTP Server: smtp.gmail.com
   Port: 587
   Encryption Mode: ExplicitSSL
   Authentication Mode: AuthLogin
   Username: [Gmail address]
   Password: [The App Password]
   
   
   

• Set gmail App password .pdf

How to download Free software packages from SmartStore

​This document provides guidelines for customers when downloading free software and firmware packages from SmartStore. The following chapter describes the procedures of:

• How to download Free software packages from SmartStore - EXTERNAL_2023.08.08.pdf

ARTI - 8bit data types not working

​ARTI driver 4.16.05

Normally the use of 8bit data types is supported if the option "Load symbols when connecting" = TRUE.

With version 4.16.05 the driver will constantly report "Datatype mismatch" if any kind of 8bit datatype, defined in the controller, is in use.

Workaround:

• Use the previous driver 4.15.04
  
• Change the datatype in the controller to 16bit
  

Extract from driver help.

• CoDeSys_ARTI_Pre_4_15_04.zip

OPC ua settings in Phoenix plxnext engineer

​04 october 2022
To use IX OPC client with Phoenix PLC's some settings are needed in the PLxnext engineering tool, and also the PLC Webserver:

Basic settings "Visibility of variables" = "Marked"

Subject1 = HMI ip adress
UNcheck "Use the thruststore for client authentication" AND " Check application URI against client certificate. 

To get the NS ( namespace ) settings in IX developer correctly, the easiest way is to browse the Phoenix server from IX developer, by clicking the small down arrow at the right side of the "ADD" button in Tags, and select "Add tags from OPC server" . Then the nemespaces are set automaticly. Otherwise you can see them in the screenshot below:
 

WEB Server:
Disable Autentication in WBM in the PLC 
Login with "admin" and the password on the plc lable

• phoenix_OPCUA.docx

Image Sticking

When utilizing TFT LCD HMI panels in applications where a fixed or partially fixed image remains displayed on the screen for extended periods of time, users may experience a phenomenon referred to by the LCD industry as Image Sticking. Image Sticking - sometimes also called "image retention" or "ghosting"- is a phenomenon where a faint outline of a previously displayed image remains visible on the screen when the image is changed.

Image sticking can be caused by:

• Static images
  
• No Screensaver
  
• Sharp contrast transition (e.g. black / white)
• High ambient temperatures
  

• Use the screensaver functionality.
  
• Changing constantly  between static and dynamic images
• Avoid excessive brightness differences between foreground and background elements
• Use colors with similar brightness
• Use complementary colors in follow-up images
  

X2 platform usb mouse if damaged touch

​20.11.2024

X2 platform in general
(tested on Marine and pro) 

On The E1000 and txA / txB platforms one could, in cases of damaged touch surface, disconnect the touch foil cable from the mainboard and emergency operate the unit with an USB mouse. With the X2 platform however, when disconnecting the touch foil cable, the USB mouse are not able to override the same way. The pointer is stuck in the upper right corner (actually it is invissible until you move the mouse quite hard).

The only workaround left, is remote control via VNC. This stil works, but requires ofcours a computer with a vnc client installed, and that the remote access feature is enabled in the project. 😥  

Best Practice Database on SD card or flash memory

​This document provides recommendations for how to setup and use the X2 HMI panel in the best way to reduce unnecessary wear on the flash memory.

For more information: Best Practice Image update for X2 pro, X2 marine and BoX2 pro 2.1 HF

• MAEN360.pdf

Quick start guide, Disable / Suppress Flashwear warning dialogue on X2 series SUEN00411

​30.01.2023
X2 series 

This Document describe how to enter the service menu, go to settings in the diagnostics part, and supress the flash wear warning message.

• SUEN00411 Suppress FlashWear warning .pdf

Max number of recipe items / tags

iX developer 2.40 SP7

The help file states that maximum 256 recipe items can be used. This is wrong, maximum number of recipe items / tags / columns is 998. 
When attemting to add more, iX will display a popup with an error message.

Convert from Exter/E1000 To X2 Series

The Mitsubishi E-Series hardware products and E-Designer software have been manufactured by Beijer Electronics for Mitsibishi for many years. In 2015, this partnership ended. Beijer-branded E1000 HMIs are now orderable directly through Beijer or one of its authorizated distributors. As your Mitsubishi terminals need to be replaced, Beijer provides a smooth transition by offering three paths:

Direct Replacement Path (E1000 panels) - A direct hardware and software replacement for most E1000 panels. The Beijer-branded E1000 panels are identical to the Mitsubishi-branded E1000 panels, only the rear labeling is different.

Direct Replacement Path (EXTER panels) - A direct mechanical drop-in hardware replacement is available for most E1000 products. The replacement products use your existing E-Designer applications after a simple project conversion to Information Designersoftware, a service offered by Beijer Technical Support

Upgrade Replacement Path (X2 panels) - Enhance your future HMI offering with modern X2 hardware and state-of-the-art iX Developer software including graphics, scripting, alarms, recipes, remote access and multiple communication drivers. iX Developer supports and integrated E-Designer to iX Developer project conversion feature (as well as Information Designer to iX Developer).

The following is a comparison chart of the older, discontinued E-series/CIMREX HMI panels to the current E1000/EXTER HMI panels, as well as the closest versions to Beijer''s latest X2 panels.

1 The Beijer-built E-series models were branded for Mitsubishi. The CIMREX models were the Beijer-branded versions of the early E-series models. All were discontinued a number of years ago.

2 The E1000 models are upgrades from the older, discontinued E-series models. Historically, the Beijer-built E1000 models were branded for Mitsubishi, but now carry a Beijer brand. The E1000 are now only available from Beijer or an authorized distributor; they are no longer available from Mitsubishi. E1000 programming is based on E-Designer software which can now only be obtained from Beijer.

3 The Beijer-built and branded EXTER models are virtually identical to the E1000 models. EXTER programming is based on Information Designer software. Beijer Technical Support can convert an E-Designer program to an Information Designer program, if required.

4 X2 models are not 100% replacement models for the E1000 or EXTER models. They have different form-factors; there are no X2 Keypad models; all X2 models have color displays. These X2 models are the closest versions to the E1000/EXTER panels. X2 pro models have more memory and faster processors than the X2 base units. iX Developer can import an E-Designer or Information Designer project to run on X2 models, though it may not import 100% of the functionality.

5 Adapter plates enable a smaller footprint EXTER or E1000 HMI to fit in the space occupied by a slightly larger, discontinued Exxx or CIMREX model. Note: Adapter Plates allow most E1000/EXTER models to fit the cut-outs used by the discontinued E-series/CIMREX models.

6 X2 series are Beijer main iX models. See the EOL Notifications for details.

X2 BatteryCheck

28.05.2024
X2 \ IX 2.50

There is a feature in the BeHwApi that gives the status of the battery. Specially convenient for Box2 since they have no screen. 
This feature was implementet aprox. from b906 of the firmware so an update can be needed if implementing in older terminals.

Sample code for a tagscript that use the SystemTagMinutes to set\reset a global tag according to the battery status:  (see also attached X2 Control 10 project)

• BatteryCheck_X2.zip

X2 image - Update EBOOT require SD card to be formatted to FAT16/FAT32

Some versions of the system program to X2 require the EBOOT to be updated as well. The EBOOT is included when you create "Recovery SD" from the Image Loader. Please note that the SD card must be formatted to FAT16/FAT32 otherwise the EBOOT will not be updated even though the "Make Recovery SD Card" setting was enabled.
The file system exFAT is not supported when upgrading the EBOOT.

The EBOOT version can be verified in the diagnostics which can be opened from the service menu.

Best Practice Image update for X2 pro, X2 marine and BoX2 pro 2.1 HF, MAEN361

​General information of image update procedure, service warnings and how to reduce flash wear on the HMI by storing data on SD cards

For more information: Best Practice Database on SD card or flash memory

• MAEN361.pdf

X2 control/pro CAN bus limitations (HW rev. 1)

​For utilization of CANopen or FreeCAN on X2 control, we recommend not to operate above 500 kBit/s, on point-to-point connections. For CAN bus network connections, with mutliple nodes, it is recommended to not run above 125 kBit/s.

In the current hardware revision, rev. 1, of X2 pro/control, the input filter on the COM connector has a high load capacitance. This may impact on termination, reflections and bit times, especially at high bit rates.

The high load capacitance will be corrected in hardware revision 2.

X2 pro / X2 marine / BoX2 pro image V2.1 HF b909

Firmware image for X2 pro, X2 marine and BoX2 pro.

• X2 LastMinuteNotes X2 pro 2.1 HF.pdf
• X2 ReleaseNotes X2 pro 2.1 HF.pdf
• X2ImageLoader_build909.exe

Viewing angle X2 series

​

Copy Debug log to accessible folder

• CopyDebugLog.zip

X2 Date time picker script

​02.02.2023
X2 series.

This sample project let the user select a date and time from a calendar type of object and stores\presents the selected date/time in various formats in Global tags.

• X2_DateTimepicker.zip

Add Tags to Tagmonitor by script

​25.03.2019
IX dev. 2.40SP1
X2 control 10 (Should work on all platforms)

Attached sample project adds predefined tags to the TagMonitor object, making it easy to switch between  several different sets of tags in the list

• TagMonitor.zip

IX alarm info request lookup in pdf by page index

​31.08.2021
IX developer 2.40 SP6
Demo driver

Consept:
This sample project uses An alarms uniq ID to produce an index.
This index is used to show aditional info from a PDF document, regarding the selected alarm, when the user click the Info button. 

 Details:
The Main script is in the alarmserver, and fires with the "AlarmServer_AlarmEventInfoRequested" event.

The index is made from the  the alarm name column (first column in the alarm configurator that normally has no function for us ), which has default values: AlarmItem0, AlarmItem1 etc. 

The script extract the number part 0,1,2 etc to a global tag, to be used as a page index in the PDF viewer object.  Finally the Popup screen is opened.

In the popup screen The Pdf is opened, using the Alarm Taxt as Title,  and the page corresponding to the index is shown.

PS.
If several alarm groups are in use, Each group will default start with the name AlarmItem0. This will make duplicates. So in this case you must manually verify that the number part in the names are uniq, and consistent.   

• AlarmInfoIndexing.zip

Program example iX Developer: Modbus TCP communication between any X2 and BFI-P2/H3.

This is to be found in Smart Engineering, SER0050. Either download the manual further down for SER0050 or the complete Smart Enginnering here.

Program example support:

• Works only towards BFI Frequency inverters BFI-H3 and BFI-P2 
  
• Start and stop
  
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber
• Trend 

HMI project created in iX Developer 2.40 SP6.

​​

• SER0050_QS_ iX to BFI-H3-P2 ModBusTCP_V1.0.0-EN.pdf

Program example iX Developer: Modbus RTU communication between any X2 and BFI-E3, BFI-P2 or BFI-H3.

This is to be found in Smart Engineering, SER0051. Either download the manual further down for SER0051 or the complete Smart Enginnering here.

Program example support:

• Works only towards BFI Frequency inverters BFI-E3, BFI-H3 or BFI-P2 
  
• Start and stop
  
• Change Setfrequency
• Normal-, fast- or coasting-stop
  
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber
• Trend 

HMI project created in iX Developer 2.40 SP6.

• SER0051_QS_ iX to BFI ModBusRTU_V1.0.0-EN.pdf

Program example iX Developer: Modbus TCP communication between any X2 HMI and BFI-E3.

This is to be found in Smart Engineering, SER0060. Either download the manual further down for SER0060 or the complete Smart Enginnering here.

Example shows how X2 Base7 control/monitor up to 63 BFI-E3 in a Modbus TCT network. Functions supported are: 

Program example support:

• Works only towards BFI Frequency inverter BFI-E3-MTP 
• Start and stop
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
  
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber
• Trend 

HMI project created in iX Developer 2.40 SP6.

• SER0060_QS_X2 to BFI-E3 ModBusTCP_V1.0.0-EN.pdf

iX Templates for E-key and X-Key

Templates for E-key and X-key, created as popups.

Unzip the *.zip file in < C:\Users\Public\Documents\Beijer Electronics AB\iX Developer 2.40 SP4\Screen Templates > and the templates will be available under “Add Screen”>Templates

Connect an action to the buttons, LED-colourfärg/Led-blink as dynamic if used.

• E_key_popup_X2Pro12.zip
• X_key_popup_X2Pro12.zip

Quick start guide - Connect X2 HMI with Nexto PLC, SUEN00414

• Connect X2 with Nexto SUEN00414.pdf

Ping from IX x2 terminal

​27.02.02
IX dev. 2.40 SP4

The attached project sample (X2 control 10), Pings a fixt IP adress every 30 sec, and set\rst a global tag accordingly, to show the status of the connection.
All code is in a scriptmodule, initiated by the "created" event.

The actual Ping syntax is: (returns true\false)
if(Core.Api.Service.ServiceContainerCF.GetService<Neo.ApplicationFramework.Interfaces.INetworkService>().Ping("10.0.0.1", 100))

• Ping.zip

iX Developer - Top10 Alarm list, based on count and/or duration

​​You easily implement a Top10 Alarm list in iX.

1. Add a DatabaseViewer control to a screen

2. Add the following script to the screen:

void AlarmScreen_Opened(System.Object sender, System.EventArgs e)
{
DatabaseViewer1.IsControlVisible = false; //Optional, to hide manual controls
}

void btnTop10_Click(System.Object sender, System.EventArgs e){
string sFrom = "1900-01-01"; string sTo = "2999-12-31";
DatabaseViewer1.SendSelectQuery("SELECT [AlarmItemName], [Text], AlarmItemDisplayName,COUNT(*) AS [Count],SUM(strftime('%s',InActiveTime) - strftime('%s',ActiveTime)) AS [Duration (s)] FROM AlarmServer WHERE ActiveTime >= '" + sFrom + "' AND ActiveTime <= '" + sTo + "' GROUP BY [AlarmItemName],AlarmItemDisplayName,[Text] ORDER BY COUNT(*) DESC,[Duration (s)] DESC","Database.db");
}

void btnTop10Duration_Click(System.Object sender, System.EventArgs e){
string sFrom = "1900-01-01"; string sTo = "2999-12-31";
DatabaseViewer1.SendSelectQuery("SELECT [AlarmItemName], [Text], AlarmItemDisplayName,COUNT(*) AS [Count],SUM(strftime('%s',InActiveTime) - strftime('%s',ActiveTime)) AS [Duration (s)] FROM AlarmServer WHERE ActiveTime >= '" + sFrom + "' AND ActiveTime <= '" + sTo + "' GROUP BY [AlarmItemName],AlarmItemDisplayName,[Text] ORDER BY [Duration (s)] DESC, COUNT(*) DESC","Database.db");
}

• Top10_Alarms.zip

IX internal CanOpen driver as master against XP325 as CanOpen Slave

​Example of IX internal CanOpen driver as master against XP325 as CanOpen Slave.

• CanOpen_XP325_IX252.zip

Quick Start Guide, MELSEC Qnn QJ71E71 Ethernet to X2 series SUEN405

​Communication driver in X2: MC Protocol

• MELSEC Qnn QJ71E71 Ethernet - X2 series SUEN00405.pdf

Quick Start Guide, MELSEC iQ-R Ethernet - X2 series SUEN00406

​Communication driver X2: MC Protocol

• MELSEC iQ-R Ethernet - X2 series SUEN00406.pdf

Quick Start Guide, MELSEC QnUDE Ethernet to X2 series, SUEN00403

​Communication driver X2: MC Protocol

• SUEN00403 - MELSEC QnUDE Ethernet to X2 series.pdf

Quick Start Guide, MELSEC FX5U/FX5UC Ethernet to X2 series, SUEN00402

• SUEN00402 - MELSEC FX5U_FX5UC Ethernet to X2 series.pdf

​​MTBF Summary X2 pro, X2 control, X2 motion, X2 marine

​​​MTBF Summary X2 pro, X2 control, X2 motion, X2 marine

• MTBF Summary X2 pro, X2 control, X2 motion, X2 marine.pdf

X2 export control and dual use

• X2 Export Control and Dual Use_B2.pdf

X2 Letter of Volatility

​​​X2 Letter of Volatility

X2 base, X2 pro, X2 marine, X2 control, X2 motion

• X2_letter of volatility .pdf

Battery test summary - X2 pro, X2 control, X2 marine

• Battery Test Summary BR2032.pdf

X2 pro image 1.0 b325 Release Notes

​X2 image pro 1.0 b325 Release Notesv

• X2 ReleaseNotes PIEN344.pdf

Release notes PIEN344D / Last minute notes PIEN345D

Release notes for software image X2 v1.4 B581 (June 2018). 

Supporting all model types of X2 pro / X2 marine / X2 control.

Click here to download the Image V1.4 b581. 

Note! This image is obsolete, use latest version.

• X2 LastMinuteNotes PIEN345D.pdf
• X2 ReleaseNotes PIEN344D.pdf

X2 image 1.0 b325 Last Minute Notes

X2 image 1.0 b325 Last Minute Notes

• X2 LastMinuteNotes PIEN345.pdf

DoC ECCN for X2 series HMI

• Declaration of conformity ECCN X2 2024-03-18.pdf

​SDoC Green Passport

​SDoC Green Passport

X2 pro, X2 control, X2 motion, X2 marine

• SDoC Green Passport X2 pro, X2 control, X2 motion, X2 marine(PROD CERT - 1164496 - 1 - A1) - 1.pdf

RoHS and REACH Declaration of Conformity

• RoHS and Reach Declaration of Conformity Beijer Electronics AB (PRODCERT - 2083745 - 1 - A1) - 1.pdf

Environmental Impact Report X2 pro, X2 marine, X2 control, X2 motion

​Environmental Impact Report X2 pro, X2 marine, X2 control, X2 motion

• Environmental Impact Report X2_rev4.pdf

ABS PDA certification X2 pro, marine, control, motion

​X2 pro, marine, control, motion ABS PDA certification

• X2 pro, marine, control, motion ABS PDA certificate No.16-SQ1516745-PDA (PROD CERT - 1206668 - 1 - A1) - 1.PDF
• X2 pro, marine, control, motion ABS PDA List for No.16-SQ1516745-PDA (PROD CERT - 1206669 - 1 - A1) - 1.PDF

DoC Green Passport Declaration

​DoC Green Passport Declaration

X2 pro, X2 control, X2 motion, X2 marine

• Green Passport Declaration X2(IFS1164495)_C.pdf

​​DoC CE, EMC, RoHS Declaration of conformity X2 pro, X2 control, X2 marine , X2 web, Box 2 pro

​​DoC CE, EMC, RoHS Declaration of conformity

X2 pro, X2 control,  X2 marine, X2 web, Box2 pro

• DoC CE manufacturer declaration X2 promarine 1-08-2024.pdf

LR Type approval certificate X2 pro, X2 marine, X2 control, X2 motion

X2 LR Type approval certificate  C1760002

X2 pro, X2 marine, X2 control, X2 motion

NOTE! not valid for X2 pro 21

• LR22242389TA -Appendix.pdf
• LR22242389TA- DAD.pdf
• LR22242389TA- TAC.pdf

Compass safe distance X2 pro/control/motion/marine

​Compass safe distance X2 pro/control/motion/marine

• Compass safe distance X2 pro_ control_Motion_marine.pdf

​​CE Verification X2 pro

​​CE Verification X2 pro

X2 pro 4, X2 pro 7, X2 pro 10, X2 pro 12, X2 pro 15, X2 pro 21

• T210625D04-E_X2 pro 7 - B2_EMC Verification.pdf
• TMXD2108000175DE_X2 pro 10 – B2_EMC Verification.pdf
• TMXD2112001853DE_X2 pro 12 - B2_EMC Verification.pdf
• TMXD2112001858DE_X2 pro 4 - B2_EMC Verification.pdf
• TMXD2112001859DE_X2 pro 21 - B2_EMC Verification.pdf
• TMXD2201000407DE_X2 pro 15 - B2_EMC Verification.pdf

Manufacturer declaration: X2 pro marine control UKCA Declaration of Conformity

​Manufacturer declaration: X2 pro marine control UKCA Declaration of Conformity

• X2 pro marine control UKCA Declaration of Conformity.pdf

​​FCC Verification X2 pro

​​FCC Verification X2 pro

X2 pro 4, X2 pro 7, X2 pro 10, X2 pro 12, X2 pro 15, X2 pro 21

• X2 pro 10_Verification FCC.pdf
• X2 pro 12_Verification FCC.pdf
• X2 pro 15_Verification FCC.pdf
• X2 pro 21_Verification FCC.pdf
• X2 pro 4_Verification FCC.pdf
• X2 pro 7_Verification FCC.pdf

BV Type approval certificate ​X2 pro, X2 marine, X2 control, X2 motion

​X2 pro, marine, control, motion BV Type approval certificate

Certificate number: 47303/B0 BV

X2 pro, X2 marine, X2 control, X2 motion

NOTE! not valid for X2 pro 21

​

• 47303_C0 BV.pdf

RS certification ​​X2 pro, X2 marine, X2 control

• TAC_21.10017.262.pdf

​CCS Marine Certificate X2 extreme, pro, control, marine

​CCS Marine Certificate X2 extreme, pro, control, marine

• CCS certificate 2022.pdf

KR ​certification​​​ ​​X2 pro, X2 marine, X2 control, X2 motion

KR ​certification​​​ ​​X2 pro, X2 marine, X2 control, X2 motion

Not valid for X2 pro 21

• CPH33151-AC002_20220203_134955.PDF

DoC battery X2 pro/marine

​DoC battery X2 pro/marine 

• BR2032_EDBD-B24006-01DoC.pdf

NKK certificate X2 pro, X2 marine, X2 control, X2 motion

​NKK certificate X2 pro, X2 marine, X2 control, X2 motion  No.TA17170M (PROD CERT - 1231856 - 1 - A1) - 1

X2 pro, X2 marine, X2 control, X2 motion
NOTE! not valid for X2 pro 21

• NKK certificate X2 pro, marine, control 2022 (PROD CERT - 1856405 - 1 - A1) - 1.pdf

ABS Type certification X2 pro, X2 marine, X2 control

​X2 ABS Type approval certificate 16-SQ1516745-PDA

X2 pro, X2 marine, X2 control

NOTE! not valid for X2 pro 21

• 21-2135529-PDA cert.pdf
• 21-2135529-PDA list.pdf
• ABS Type approval.pdf

DNV certification ​​X2 pro, X2 marine, X2 control

​DNV certification​​​ ​​X2 pro, X2 marine, X2 control

Not available for X2 pro 21

• TAA00000N8-revision1.pdf

Cable CAB113: Cable for ModBus RS485 between X2 panel and BFI

• 6222S1.pdf

CAB108 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C iX operator panel

​CAB108 Gender changer. 9pin Dsub male/male

• CAB108.pdf

CAB105 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between Allen Bradley Micrologix and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

• CAB105_3m.pdf

CAB106 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between OMRON Host Link and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

• CAB106_3m.pdf

CAB107, 25-pol to 9-pol adapter, Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, iX Panel TxA/B/C operator panel

CAB107  9pin Dsub to 25pin Dsub, for using EXTER/E1000 422/485 cables on X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 0,2 meters.

• CAB107.pdf

CAB110 Cable Drawing for X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

​CAB110 Cable for MELSEC Q Transparent mode for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

• CAB110-3m.pdf

CAB109 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C iX operator panel

CAB109 Y-split cable to utilize more than two COM ports on X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 2 x 0,1 meters.

• CAB109.pdf

CAB153 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

RS422 panel side termination plug​
Used when RS422 point to point communication is used 

CAB150 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, iX Panel TxA/B/C operator panel

​3 way splitter cable
Used when 2xRS485 are needed

• CSS-DWG-1509005 100-0526 CAB150.pdf

CAB104 Cable Drawing forX2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between PC standard RS232 and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C 

Cable length: 3 meters.

• CAB104_3m.pdf

CAB103 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

 Cable between MELSEC FX1/2/3-series and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters in drawing CAB103_3m.pdf.

Cable length: 10 meters in drawing CAB103_10m.pdf.

Cable length: 15 meters in drawing CAB103_15.pdf.

• CAB103_10m.pdf
• CAB103_15m.pdf
• CAB103_3m.pdf

CAB101 Cable Drawing for X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

CAB101 Cable between MELSEC Q and  X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

• CAB101_3m.pdf

CAB100 Cable Drawing for X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between GE Fanuc and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

• CAB100_3m.pdf

​​Outline drawing, X2 pro 7, X2 marine 7, X2 control 7, X2 motion 7

​​Outline drawing, X2 pro 7, X2 marine 7, X2 control 7, X2 motion 7

• X2 pro 7, X2 marine 7, X2 control 7, X2 motion 7, Outline drawing.dwg
• X2 pro 7, X2 marine 7, X2 control 7, X2 motion 7, Outline drawing.PDF

​​Cutout drawing, X2 pro 7, X2 marine 7, X2 control 7, X2 motion 7

​​Cutout drawing, X2 pro 7, X2 marine 7, X2 control 7, X2 motion 7

• X2 pro 7, X2 marine 7, X2 control 7, X2 motion 7, Cutout drawing.PDF

​​3D drawing, X2 pro 7, X2 marine 7, X2 control 7, X2 motion 7 in STEP format

​​3D drawing, X2 pro 7, X2 marine 7, X2 control 7, X2 motion 7 in STEP format

• X2 pro 7, X2 marine 7, X2 control 7, X2 motion 7, 3D drawing.STEP

iX Developer Reference Manual, MAEN355 rev. B (current version)

• iX250 ReferenceManual MAEN355B.pdf.pdf

X2 base / pro / extreme / marine / control - Configuration and Image manual , MAEN352 rev B

MAEN352B: describes the X2 series system program V2.2 and later . 

This manual replaces MAEN205 rev. G

• X2_Configuration_MAEN352B_2024-05-02.pdf

Best Practice Image Update X2 HMI Panels 2.2, MAEN361 rev. B

• X2_Best_Practice_Image_Update_MAEN361B_2023-06-07.pdf.pdf

​​Installation Manual X2 pro, X2 marine, X2 control MAxx202

​​Installation Manual X2 pro, X2 marine, X2 control

• Chinese Simplified
• Chinese Traditional
• English
• French
• German
• Italian
• Portuguese Brazil
• Spanish

• Installation Manual X2 pro, X2 marine, X2 control, X2 motion MABP202 Chinese Simplified.pdf
• Installation Manual X2 pro, X2 marine, X2 control, X2 motion MABP202 Chinese Traditional.pdf
• Installation Manual X2 pro, X2 marine, X2 control, X2 motion MABP202 French.pdf
• Installation Manual X2 pro, X2 marine, X2 control, X2 motion MABP202 German.pdf
• Installation Manual X2 pro, X2 marine, X2 control, X2 motion MABP202 Italian.pdf
• Installation Manual X2 pro, X2 marine, X2 control, X2 motion MABP202 Portuguese Brazil.pdf
• Installation Manual X2 pro, X2 marine, X2 control, X2 motion MABP202 Spanish.pdf

Installation manual for X2 pro 7 - B2 2eth, MAEN265 English

• X2_pro_7_-_B2_2eth_MAEN265_English.pdf

​Guidelines for TxA and TxB migration to X2.

​​Guidelines for TxA and TxB migration to X2.

• iX TxA and iX TxB to X2 migration guidelines 2016-08-25.pdf
• iX TxA and iX TxB to X2 migration guidelines 2016-08-25.pptx

SqlProxy - Connects iX Panels transparently to SQL Server

​There's sometimes a need to connect to SQL Server from an iX Panel.
In CE6 based panel, this has been possible using sqlclient.

Nothing similar is however supported in CE8 (most X2 panels).

During the years, we have helped customers creating solutions based on SQL Server connectivity.
There is a need to be able to move such an application to X2 aswell with minimal change of script code.

One solution is "SqlProxy" that is presented in the attached pdf file.
​
Download:
https://www.beijerelectronics.com/en/support/Help___online?code=4D4C0877-4291-43C8-BA7B-54A456B0B5FE
Install in e.g. C:\Users\Public\SqlProxy to avoid access right issues!

October 16, 2019: The file SqlProxy_191016C.zip contains CURRENT VERSION !
SqlProxy 1.1.0.1. Make sure to use corresponding SqlProxy.exe , tcpServer.dll and scmSqlProxy.Script.cs from the same package!
Supports unicode (e.g. Chinese characters and queries like select * from Customers where Name = N'公司黄页' ). Performance improved.

For best performance, limit the amount of data (number of rows and number of columns) to the minimum necessary with your SQL query. Example: "select top (1) createdTime, columnName3, columnName149 from tableName where columnName1 = 'something' order by createdTime desc"
to get just the few interesting columns from the very latest record where columnName1 = 'something'

Furthermore, for best performance, use StringBuilder when receiving reply from SqlProxy instead of += in the iX demo project. scmSqlProxy.Script_StringBuilder.zip in demo project contains this alternate scmProxy.Script.cs file if needed.
Contact support @beijer.se for additional info!

• SqlProxy_161202C.pdf
• SqlProxy_190115.pdf
• SqlProxy_191016C.zip
• SqlProxy_as_service_170330.pdf

Remote Access Viewer v1.5.4, for Exter/E1000 - TxA/TxB/TAxx - X2 panels

Remote Access Viewer is a program for remote access and control Exter/E1000 - TxA/TxB/TAxx - X2 panels.

It is possible to access, reflect and control panels from a PC by using the VNC client program, Remote Access Viewer (freeware), together with the built-in VNC server (Remote Access function) in the iX Panels.

NB: Even though the help file suggests another key combination, please note that Ctrl-Alt-Shift-F toggles Full screen mode on / off best, so you Restore from Fullscreen mode with this key combination! 

vncviewer.exe_patch.zip contains a patched vncviewer.exe

• MA00756.pdf
• RemoteAccessViewerSetup 1.5.4_iX.exe
• vncviewer.exe_patch.zip

Melsec Q Profibus DB development kit

​This package contains:

• BE09DA.GSD
• DP_IO32_1.zip
• GXConfig_Melsec_DP_IO32_3_4.dp2
• MELSEC_Q_Profibus_DP_V0_Pre2.cab
• MELSEC_Q_Profibus_DP_V0_Pre2.mpd
• MelsecQ_PB_X2control10_Demo.zip
• ReadMe.txt

FTDI Direct driver demo

​This demo covers the utilization of the FTDI direct driver.

• FTDI_D2XX_Demo (X2 control 12).7z

EDS file for CiX-CAN and X2

EDS_CiX-CAN.zip includes EDS files for the CiX-CAN module:

CiXCANopen.eds                                      General EDS file

CiXCANopen_Default_PDO1.eds              EDS file corresponding to Default Slave PDO setting 1

CiXCANopen_Default_PDO2.eds              EDS file corresponding to Default Slave PDO setting 2

CiXCANopen_Default_PDO3.eds              EDS file corresponding to Default Slave PDO setting 3

CiXCANopen_Default_PDO4.eds              EDS file corresponding to Default Slave PDO setting 4

EDS_X2.zip includes EDS files for the internal CAN on X2 (extreme) panels:

X2CANopen.eds                                      General EDS file

X2CANopen_Default_PDO1.eds              EDS file corresponding to Default Slave PDO setting 1

X2CANopen_Default_PDO2.eds              EDS file corresponding to Default Slave PDO setting 2

X2CANopen_Default_PDO3.eds              EDS file corresponding to Default Slave PDO setting 3

X2CANopen_Default_PDO4.eds              EDS file corresponding to Default Slave PDO setting 4

​

• EDS_CiX-CAN.zip
• EDS_X2.zip

GSD files for CiX-DP Profibus module

• BE09DA2.GSD
• BE09DA3.GSD

X2 series (German)

​36-page brochure incl. general and product family descriptions, technical data, iX and WARP software descriptions, migration paths, etc.

• BRDE631E - X2 brochure_2019_15aug.pdf

X2 brochure (Spanish)​

X2 brochure (Spanish)​

• BRES631A- X2 brohure_low.pdf

X2 brochure 2019 (French)

• BRFR631E - X2 brochure_2019_15aug.pdf

X2 brochure (English), BREN631

​​36 page brochure incl. general and product family descriptions, technical data, iX and acirr+ software descriptions, migration paths, etc. Incl. X2 extreme, X2 pro21 and two-year warranty

• BREN631F - X2 brochure_210309.pdf

X2 pro / marine / BoX2 pro image V2.2 b1041

​*All firmware files will be moved to smart store. Please follow this link to download this version:

https://smartstore.beijerelectronics.com/en/Firmware/15045/x2-pro-ver-2-2-b1041

Related documents:

• x2 pro v2.2 b1041 image.zip

X2 pro / X2 marine / BoX2 pro image V2.1 HF b909

Check on SmartStore for latest image version!

Unfortunately, this Sharepoint/HelpOnline entry is broken. Use this one instead:

X2 pro / X2 marine / BoX2 pro image V2.1 HF b909
https://www.beijerelectronics.com/en/support/Help___online?code=C8EE4A0E-1744-4454-BAB8-23B0F80400A4

Firmware image for X2 pro, X2 marine and BoX2 pro.

• X2 LastMinuteNotes X2 pro 2.1 HF.pdf
• X2 ReleaseNotes X2 pro 2.1 HF.pdf
• X2ImageLoader_build909.exe

X2 pro - X2 control - Image V1.3b569 (Obsolete)

X2 image v1.3 Build569

NOTE! Update of Image requires update of related EBOOT Build 569 as well.
Update EBOOT via “Make Recovery SD Card”, see “Beijer Panel Image manual" (MAEN205x) for information.
- The EBOOT is included when you create "Recovery SD" from the Image Loader.

• X2 image manual MAEN205B.pdf
• X2 image v1.3 Build569.exe
• X2 image v1.3 LastMinuteNotes PIEN345C.pdf
• X2 image v1.3 ReleaseNotes PIEN344C.pdf

X2 pro / X2 marine / X2 control - Image V1.4 b581 (Obsolete)

​Firmware/image version 1.4 build 581 to  X2 pro / X2 marine / X2 control

Click here to download Release notes PIEN344D / Last minute notes PIEN345D.

• X2ImageLoader_build581.zip

X2 image 1.0 b325

​X2 image 1.0 b325

For deteiled overview about known limitations review the X2 Last Minute Notes.

• X2 image 1.0 b325.zip

X2 image 1.1 b448 release

​X2 image 1.1 b448 release

X2 pro 4, X2 pro 7, X2 pro 10, X2 pro 12, X2 pro 15, X2 pro 21.
X2 marine 7, X2 marine 15.

• X2 1.1 b448 Image LastMinuteNotes PIEN345A.pdf
• X2 1.1 b448 Image ReleaseNotes PIEN344A.pdf
• X2 1.1 b448 ImageLoader.exe

X2 pro / X2 marine / BoX2 pro, image V2.0 b773 (Obsolete)

​Image loader for upgrading X2 pro, X2 marine and BoX2 pro devices to version 2.0. See attached Release notes as well as Last minute notes.

Latest verion is found here:
X2 pro series 2.1 b894 (Current)
https://www.beijerelectronics.com/en/support/Help___online?code=4ABA7F9F-7DCB-4A57-AFDF-1FC752EE50DA
​Firmware image for X2 pro, X2 marine and BoX2 pro.

• X2 LastMinuteNotes PIEN345F.docx
• X2 ReleaseNotes PIEN344F.docx
• X2 ReleaseNotes PIEN344G1.pdf
• X2ImageLoader_build773.exe

X2 pro / X2 marine / BoX2 pro image V1.5 (Obsolete)

​Official release of version 1.5 b686

• X2 LastMinuteNotes PIEN345E.pdf
• X2 ReleaseNotes PIEN344E.pdf
• X2ImageLoader_build686.exe